Ostatní počítače

Parts of this topic may be machine translated.

AP 85

Type: mini computer kit

Purpose: technology management. processes

Bit width: 8

Addressability: 512KB

APS-5

Type: temperature measurement and control system

Purpose: programmable temperature control

Bit width: 8

Addressability: 64KB

BM 630

Type: modular microprocessor system

Purpose: control unit of electronic meters. systems

Bit width: 8

Addressability: 32KB

DERIS 900

Type: decentralized control system

Purpose: measurement, control and regulation of complex technologies. processes

Bit width: 16

Addressability: 2048KB

GS-3

Type: graphic terminal kit

Purpose: two-dimensional interactive processing. color graphics and alphanumeric information – autonomously or with a superior computer

Bit width: 16

Addressability: 800KB system memory, 1.28MB graphics memory.

Other designation: CM 7318

KA 10

Type: dia. data collection and processing system

Purpose: technology management. processes

Bit width: 16

Addressability:

M4T 276

Type: microcomputer

Designation: managing member technologist. processes of a smaller scale

Bit width: 8

Addressability: 64KB

MARK

Type: modular system for automation, control and communication

Purpose: for the creation of extensive technology control systems. processes in reality. time

Bit width: 16

Addressability:

Microlog

Type: microprocessor control system

Purpose: for industrial applications

Bit width: 8

Addressability: 256KB

MIDAS

Type: control system for sequential automata

Purpose: for autonomous driving or cooperation with a superior computer in real life. time

Bit width: 1

Addressability: 32KB

MIDIAS 80

Type: microcomputer system for distributed control and automation

Purpose: data collection and technologist management. processes in real time

Bit width: 8

Addressability: 64KB

MICROPAS 80

Type: microcomputer kit

Purpose: control and regulation of technol. medium-sized systems, data processing and measurement in larger systems

Bit width: 8

Addressability: 32K RAM, 16K EPROM

MICROPAS PR 80

Type: programmable controller based on MIKROPAS 80

Purpose: control of continuous and discrete technologies. processes

Bit width: 8

Addressability: 8K RAM, 32K EPROM

MICROSAT

Type: microcomputer industrial kit

Purpose: for creating dia. control systems

Bit width: 8

Addressability: 1MB

MICROWAVE

Type: kit for industrial control see MIKROSAT

Purpose: for the creation of microprocessor control systems in industry

Bit width: 8

Addressability: 1MB

MIRA

Type: microcomputer control system

Purpose: technology management. processes

Bit width: 8

Addressability: 64KB

FRAGRANCE

Type: single board computer see MIKROSAT

Purpose: basis of the MIKROSAT system

Bit width: 8

Addressability:

MP 80

Type: modular microprocessor system

Purpose: management and control of work machines and smaller technological units

Bit width: 8

Addressability: 64KB

MPK 80

Type: compact microprocessor system

Purpose: control of smaller logic-type systems

Bit width: 8

Addressability: 64KB

MXP-16

Type: multiprocessor computing system

Purpose: work in multi-program and multi-user mode, interactive processing of image information in real time

Bit width: 8

Addressability: 1024KB

PLS 1.1

Type: programmable logic kit

Purpose: technology management. processes

Bit width: 16

Addressability: 2KB RAM, 8KB EPROM

PPC-4

A polyprocessor system intended for controlling technologists. processes

Bit width: 8

ČKD Prague

PRIMIS

Type: microcomputer kit

Purpose: technology management. logical processes

Bit width: 8

Addressability: 64KB

REGEN-2

Type: measuring and control system for energy based on SAPI 1

Purpose: measurement and control of electricity consumption

Bit width: 8

Addressability: 64KB

RMS

Type: microcomputer development system

Purpose: development of programs and tech. resources

Bit width: 8

Addressability: 64KB

SOMD

Type: multiprocessor system

Purpose: study of artificial intelligence, process. images

Bit width:

Addressability:

UCS-48

Type: universal control system

Purpose: control of sequential automata, preprocessing. analogue. signals

Bit width: 8

Addressability: 9KB RAM

DIAMO

Type: a set of elements for controlling technologists. wholes

Purpose: measurement, control and regulation of complex technologies. processes

Bit width: 8

Addressability: 64KB RAM, 16KB ROM

PL 80

Type: see DIAMO

Destination:

Bit width:

Addressability:

SCS DAMAGE

Microcomputer control and security system for securing control of complex functional units and technol. processes

VUET Skoda Pilsen

Bit width: 16

Cooperation between SMEP and DIAMO

Also referred to as DIAMO-SCS

IBM PC clones WITHOUT Bratislava, k.p.

BRATISLAVSKÉ ELEKTROTECHNICKÉ ZÁVODY N.P.

BZ 1-386

• Type: professional personal microcomputer
• Designation: science, technology, economics calculations on Eng. workplaces
• Bit width: 32
• Manufacturer / supplier: , Bratislava
• Start of production: 1988
• So far produced: not specified
• Price of the basic configuration: 186 thousand CZK / foreign exchange participation 66 thousand
• Plan 1989: not stated
• Use: sciences. technical econ. calculations at engineering workplaces and in industry, control of technological processes
• Basic configuration - design: 3-piece set: 32-bit processor I 80386, possibly also I 80387, floppy disk 5¼" /1.2 MB/, hard disk 5¼" /80 MB/ and operating memory 1 MB, expandable to 16 MB in a common case, keyboard, RGB-screen monitor 14" with EGA-adapter /640 × 350 points, 16 colors/
• Operating systems: MS DOS 3.21
• Programming languages: GW Basic
• Application programs: not listed
• Bus:
• Type: SYN
• Data width: 32
• Address width: 32
• Interface - inputs/outputs:
• Centronics
• RS 232 C
• Basic circuits: I 80386 /20 MHz/, /I 80387/
• Also sold as:
• Also sold as:
• BZ CAD-2 (interactive microcomputer system, CAD and CAP design work at engineering workplaces, automation of engineering work - see below)
• Price of the basic configuration: 381 thousand. CZK / foreign exchange participation 300 thousand
• Use: CAD and CAP design works at engineering workplaces, automation of engineering works
• Basic configuration - design: 7-piece set: 32-bit processor I 80386 with coprocessor I 80387, RAM 4 MB, floppy disk 5¼" /1.2 MB/, hard disk 5¼" /80 MB/ and power supply in one case, keyboard, monochrome screen 14" with communication adapter HERKULES /720 × 348 dots/, RGB screen 20" with adapter for graphics OCC-20 F /1365 × 870 points, 16 colors/, streamer 60 MB, digitizer A3, plotter A3

BZ 1-AT

• Type: PC-AT type professional personal microcomputer
• Designation: science, technology, economics calculations, CAD type tasks
• Bit width: 16
• Addressability: 16MB
• Also sold as:
• BZ CAD-1 (microcomputer graphics system, 16bit, 16MB, design work at engineering workplaces)
• BZ DTP (microcomputer publishing system, 16bit, 16MB, creation of mirrors and small publications)
• BZ Image (microcomputer system for image processing, 16bit, 16MB, evaluation of micrographic, cartographic, aerial, etc. images)

BZ 1-XT

• Type: PC-XT type professional personal microcomputer
• Designation: science, technology, economics calculations
• Bit width: 16/8
• Addressability: 640KB

BZ Portable

• Type: portable microcomputer
• Designation: science, technology, economics calculations
• Bit width: 16
• Addressability: 640KB

IBM PC clones other

DATAS-AT

Type: professional personal microcomputer

Purpose: science, technology, economics calculations on Eng. workplaces

Bit width: 16

Addressability: 1

Control Systems

NS 260.03

Right-angled control system intended for control of boring and milling type machine tools

• Category: 8-bit systems - control systems (II.3)
• Manufacturer / supplier: TESLA Kolín, k.p., Kolín IV
• Start of production: 1989
• Plan 1989: 120 pcs
• Application: rectangular control of milling and boring machines equipped with a central drive with positional coupling; movement always in one of 4 coordinates
• Basic configuration – design: 452 x 268 x 247 mm plug-in cassette with control and display panel; processor based on MHB 8080, user memory 11 KB backed up
• Bus:
• Type: S 1000
• Data width: 8
• Address width: 8
• Interface - inputs/outputs:
• 21 inputs 24 V / 20 mA
• 16 outputs 24 V / 100 mA
• NF for tape recorder
• Basic circuits: MHB 8080 A

NS 261

Rectangular CNC control system

• Category: 8-bit systems - control systems (II.3)
• Manufacturer / supplier: TESLA Kolín, k.p., Kolín IV
• Start of production: 1988
• Made until 1989: 20 pcs
• Plan 1989: 30 pcs
• Application: rectangular control of machine tools equipped with a central drive, with stepped control of the amount of feed, always in one of the four coordinates
• Basic co

References

• Katalog organizačních praktik, 1989, příloha č. 24 b, Mikropočítače, minipočítače a řídicí systémy československé výroby,